- Detects temperature at every meter on a fiber optic sensor cable by the phenomenon known as Raman Effect and Optical Time Domain Reflectometry.
- Temperature range of -20 °C to 120 °C.
Detects single point temperature by measuring the decay time of Fluorescent material formed at the tip of the fiber optic sensor cable.
Temperature range of -40 °C to 260 °C.
FluoroSenz Fiber Optic Temperature Monitoring System conducts real time monitoring to accurately measure point temperatures of hotspots in Transformers, Switchgears, Generators. It is designed specifically for use in harsh environments with High Electric and Magnetic fields. The system is based on Calibration-free Fluorescence Time Decay Technology, which eliminates the need for sensor recalibration over the sensor’s lifetime.
The System is based on Fluorescence Time Decay of a Rare-Earth Fluorescence Sensor formed on the tip of the Optical Fiber. The other end of the fiber is attached to a light source which is used to excite the Fluorescent material. After excitation, the excited fluorescent material tends to return from its peak state to ground state by emitting a photon (light). This time taken to reach to the ground state is dependent on the ambient temperature and thus temperature is deduced by forming a relation between Time Decay and Temperature.
| Temperature Measurement Range | -40°C to 260°C |
| Temperature Accuracy | ±1°C |
| Temperature Resolution | 0.1°C |
| Display | 7 Segment Digital Tube Display |
| Number of Channels | 1/2/4/8/16 |
| Temperature Unit | °C or °F |
| Response Frequency | 2 Second Per Channel |
| Communication Ports | RS-485, Ethernet (RJ-45), Fiber Port |
| Communication Protocol | MODBUS IEC61850 (Compatible) |
| Relay Output | 8 Programmable Relay 1 System Fault Relay |
| Analog Output | 4-20 mA (one for each channel) |
| Data Logging | 1 GB Industrial Grade SD Card |
| Power Supply | 24 VDC |
| Power Consumption | ≤10 Watt |
| Fiber Optic Length | 1 m to 25 m |
| Operating Temperature | -20°C to 65°C |
| Temperature Range | -40°C to 260°C |
| Cable Jacket | PTFE |
| Outer Diameter | 3 mm |
| Cable Termination | ST connector type |
| Standard Length | 1 m, 5 m, 8 m |
Our sensor cables, accessories work well only with our FluoroSenz.
Fsenz is Organised and Managed by Tempsens Instruments (I) Pvt. Ltd. is one of the largest solution providers for Thermal and Cable Products. The manufacturing facilities are based in India, Germany, and Indonesia. It’s a part of Pyrotech Group, which was established by four technocrats in 1976 at Udaipur, Rajasthan with the first product as Thermocouple and RTD.
